WelGardÂŽ I WELL WORTH IT.

5 Things Worth Checking on this Fall

October 01, 2026•5 min read

🍂 Fall is a natural time for home maintenance and the prevention of problems over the winter. While clearing gutters, checking your heating systems, and preparing your outdoor spaces - give your private well a little TLC.

After decades of helping homeowners through well emergencies, WelGardÂŽ knows that a few simple steps can make a difference.

1. Give Your Wellhead Some Breathing Room - check for damage

Your wellhead is one of the few visible parts of your well system. This includes the casing, which extends into the ground, with a protective cap designed to keep insects and other unwanted materials out. As leaves accumulate and vegetation grows, your wellhead can become difficult to access, hide damage, and prevent easy maintenance. A damaged or improperly sealed wellhead may provide an entry point for contaminants, and cold weather elements. Even small openings can allow insects or surface debris to enter the system.

What to check:

• Clear away fallen leaves, weeds, and other debris surrounding the wellhead.

• Look for cracks, corrosion, or visible damage to the casing.

• Make sure the well cap is secure and undamaged.

• Keep lawn equipment, stored materials, and vehicles away from the wellhead.

WelGardÂŽ Well-Care Tip: Never remove the well cap yourself. If it appears loose, cracked, or damaged, contact a qualified well professional.

2. Watch Where the Rain Goes - water should drain away from the well head

Fall often brings heavier rainfall, making it an excellent time to observe drainage around your well. Surface water that does not runoff can carry fertilizers, pesticides, bacteria, and other contaminants. If water collects around a well casing, particularly damaged ones, the risk of contamination increases. Proper grading helps direct surface water away from the well.

What to check:

• Observe the ground around your well after rainfall.

• Look for puddles or persistent standing water near the casing.

• Check whether landscaping or recent construction has changed drainage patterns.

• Keep fertilizers, pesticides, fuel, and other chemicals away from the well area.

WelGardÂŽ Well-Care Tip: If water consistently pools around your well, consult a qualified well contractor before attempting to change the grading or soil around the casing.

3. Pay Attention to Your Water Pressure - stay alert to changes

Your well pump and pressure tank work together to deliver water throughout your home at a specific range of pressure. The pressure tank stores water under pressure, allowing the system to supply water without requiring the pump to run continuously. When equipment doesn’t function properly, changes in water pressure may be the first noticeable symptom and may indicate issues with the pressure tank, pressure switch, pump, plumbing, or water supply. Short cycling will also shorten the life of the pump.

What to watch for:

• Water pressure that suddenly becomes weaker or fluctuates.

• Faucets that sputter or deliver air along with water.

• A pump that starts and stops more frequently than usual.

• Noticeable pressure changes when multiple fixtures are running.

WelGardÂŽ Well-Care Tip: Low water pressure will result for non-well related issues such as clogged fixtures and water treatment filters and equipment. Check them first. If your pump begins cycling frequently (less than 30 seconds), have the system evaluated. Avoid adjusting electrical controls or pressure settings without professional guidance.

4. Protect Exposed Equipment Before Freezing Temperatures Arrive - insulate if equipment is exposed to cold temps

Many wells use submersible pumps installed deep in the well, where freezing temperatures are generally not a concern. However, above ground pipes, pressure tanks, valves, and other equipment may be vulnerable to cold weather. Water expands when it freezes. Inside an exposed pipe or component, that expansion can cause cracks, leaks, or equipment damage. Frozen pipes disrupt water flow and can burst when ice expands. The extent of protection you need depends on your local climate, specific equipment, and well configuration.

What to check:

• Identify any pipes or equipment located in unheated spaces.

Inspect existing insulation for damage or gaps.

• Monitor temperature near exposed equipment with a nearby thermometer

• Check that protective enclosures are secure and properly maintained.

• Look for exposed plumbing in garages, crawl spaces, or outdoor pump houses.

WelGardÂŽ Well-Care Tip: Have a qualified professional evaluate vulnerable equipment and possible remedies - before freezing weather arrives. Never use an open flame to thaw frozen pipes.

5. Review Your Well's Water Testing and Maintenance History

A well can appear to operate perfectly while its equipment and water quality changes. The responsibility of monitoring your well water is yours as the well owner. Some contaminants cannot be detected by taste, smell, or appearance. Regular laboratory testing provides information that visual inspections alone cannot. Centers for Disease Control and Prevention recommends testing private well water at least once a year.

What to check:

• Total coliform and e-coli bacteria: Indicators that contamination may be entering the water supply.

• Nitrates: Contaminants that can come from fertilizers, septic systems, and other sources.

• Total dissolved solids: A measurement of dissolved substances that may affect water characteristics.

• pH: A measure of acidity or alkalinity that can influence corrosion and plumbing conditions.

WelGardÂŽ Well-Care Tip: Use a state-certified laboratory for water testing. Additional testing may be necessary depending on local geology, nearby land use, and environmental conditions.

Private well ownership requires your vigilance, but it doesn't have to be complicated. And while fall is an excellent time to review these five areas, good well care is a year-round practice. A few minutes of attention today may help you recognize a problem before it suddenly stops your water supply tomorrow.

Your well. Our worry. 💙

__________

If you are not already a Member, we invite you to discover the benefits of WelGard protection TODAY. Get immediate response (24/7/365) when anything breaks in your well (or you have a question). Did we mention that there is no out-of-pocket costs for repairs? Explore WelGard benefits NOW. We have you covered.

The Well Worth It Blog is all about residential wells, why we love them, and how to keep yours healthy and flowing clean, drinkable water for you and your family.

Back to Blog

Rate This Blog Post

What did you think of this blog post? Did you find it helpful?

Ready to Protect Your Well?

Explore WelGardÂŽ membership options and find the protection that fits your home.

Gary Baker

WelGard Founder - Well Expert

"WelGard was created when one family lived the worst-case scenario. We have grown into a family of trusted partners and loyal members. These videos were created by the myself and our Well-Expert Team - to teach, to share, and to show you what WelGard is all about."